LeMieux Stealth XC Boot Front

LeMieux Stealth XC Front boots These technical XC boots have been designed for strength and optimum protection but made with the comfort of active legs in mind. The outer material of this sleek design is perforated permitting 360 degrees exchange of air over its entire surface area whilst galloping, reducing tendon temperature.
Manufacturer: Horse Health
£36.50

  1. Lightweight: Optimum weight to strength ratio
  2. Moulds: Moulds to leg & tendon profile and supports the back of the fetlock joint without restricting flexion & movement.
  3. No Water Retention: Fabrics resist the up take of water
  4. Freedom: behind the knee to prevent pinching under full flexion
  5. Strike Protection: provided by polycarbonate tendon guards with lifetime guarantee
  6. Shock Absorbing: integral strength of boot fabric offers support & absorption of concussion
  7. Natural Fit: and feel without the rigidity associated with many other XC boots.
  8. Neoprene Free: inner lining is breathable, easy on the skin and avoids heat & sweat build up and irritation
  9. Non Vented: avoids use of open air vents which can allow dust and mud to get between the leg and boot lining causing rubbing.

The size range of these new boots caters for most boned types and size.

        Light Bone      Heavy Bone  
  Front  Hind Front  Hind  
14.2hh small small medium medium  
15.2hh medium medium medium large  
16hh medium medium medium large  
16.2hh large large large xlarge  
17hh + large xlarge xlarge xlarge  
Light Bone eg: Arab, Thoroughbred, Light Show Hack    
Heavy Bone eg: Cob, Hunter, Warmblood    

Measurements:

Small Front:
Measuring the boots from left to right around the leg, from approximately the centre of the cannon bone – 26cm from edge to edge.

Measuring the length of the boot at the back of the tendon from top to bottom - 21cm

Small Hind:
Measuring the boots from left to right around the leg, from approximately the centre of the cannon bone – 26cm from edge to edge.
Measuring the longest part of the boot – the inside length - 29.5cm Measuring the strike guard at the front of the boot from top to bottom – 22cm

Medium Front:
Measuring the boots from left to right around the leg, from approximately the centre of the cannon bone – 26.5cm from edge to edge.
Measuring the length of the boot at the back of the tendon from top to bottom - 23.5cm

Medium Hind:
Measuring the boots from left to right around the leg, from approximately the centre of the cannon bone – 27cm from edge to edge.
Measuring the longest part of the boot – the inside length - 30.25cm
Measuring the strike guard at the front of the boot from top to bottom – 22cm

Large Front:
Measuring the boots from left to right around the leg, from approximately the centre of the cannon bone – 28.5cm from edge to edge.
Measuring the length of the boot at the back of the tendon from top to bottom - 24.5cm

Large Hind:
Measuring the boots from left to right around the leg, from approximately the centre of the cannon bone – 29.5cm from edge to edge.
Measuring the longest part of the boot – the inside length – 32.5cm
Measuring the strike guard at the front of the boot from top to bottom – 24cm

Extra Large Front:

Measuring the boots from left to right around the leg, from approximately the centre of the cannon bone – 29.5cm from edge to edge.
Measuring the length of the boot at the back of the tendon from top to bottom - 25.5cm
 

Extra Large Hind:
Measuring the boots from left to right around the leg, from approximately the centre of the cannon bone – 30.5cm from edge to edge.
Measuring the longest part of the boot – the inside length – 33.5cm
Measuring the strike guard at the front of the boot from top to bottom 24.75cm

  1. Lightweight: Optimum weight to strength ratio
  2. Moulds: Moulds to leg & tendon profile and supports the back of the fetlock joint without restricting flexion & movement.
  3. No Water Retention: Fabrics resist the up take of water
  4. Freedom: behind the knee to prevent pinching under full flexion
  5. Strike Protection: provided by polycarbonate tendon guards with lifetime guarantee
  6. Shock Absorbing: integral strength of boot fabric offers support & absorption of concussion
  7. Natural Fit: and feel without the rigidity associated with many other XC boots.
  8. Neoprene Free: inner lining is breathable, easy on the skin and avoids heat & sweat build up and irritation
  9. Non Vented: avoids use of open air vents which can allow dust and mud to get between the leg and boot lining causing rubbing.

The size range of these new boots caters for most boned types and size.

        Light Bone      Heavy Bone  
  Front  Hind Front  Hind  
14.2hh small small medium medium  
15.2hh medium medium medium large  
16hh medium medium medium large  
16.2hh large large large xlarge  
17hh + large xlarge xlarge xlarge  
Light Bone eg: Arab, Thoroughbred, Light Show Hack    
Heavy Bone eg: Cob, Hunter, Warmblood    

Measurements:

Small Front:
Measuring the boots from left to right around the leg, from approximately the centre of the cannon bone – 26cm from edge to edge.

Measuring the length of the boot at the back of the tendon from top to bottom - 21cm

Small Hind:
Measuring the boots from left to right around the leg, from approximately the centre of the cannon bone – 26cm from edge to edge.
Measuring the longest part of the boot – the inside length - 29.5cm Measuring the strike guard at the front of the boot from top to bottom – 22cm

Medium Front:
Measuring the boots from left to right around the leg, from approximately the centre of the cannon bone – 26.5cm from edge to edge.
Measuring the length of the boot at the back of the tendon from top to bottom - 23.5cm

Medium Hind:
Measuring the boots from left to right around the leg, from approximately the centre of the cannon bone – 27cm from edge to edge.
Measuring the longest part of the boot – the inside length - 30.25cm
Measuring the strike guard at the front of the boot from top to bottom – 22cm

Large Front:
Measuring the boots from left to right around the leg, from approximately the centre of the cannon bone – 28.5cm from edge to edge.
Measuring the length of the boot at the back of the tendon from top to bottom - 24.5cm

Large Hind:
Measuring the boots from left to right around the leg, from approximately the centre of the cannon bone – 29.5cm from edge to edge.
Measuring the longest part of the boot – the inside length – 32.5cm
Measuring the strike guard at the front of the boot from top to bottom – 24cm

Extra Large Front:

Measuring the boots from left to right around the leg, from approximately the centre of the cannon bone – 29.5cm from edge to edge.
Measuring the length of the boot at the back of the tendon from top to bottom - 25.5cm
 

Extra Large Hind:
Measuring the boots from left to right around the leg, from approximately the centre of the cannon bone – 30.5cm from edge to edge.
Measuring the longest part of the boot – the inside length – 33.5cm
Measuring the strike guard at the front of the boot from top to bottom 24.75cm

Write your own review
  • Only registered users can write reviews
  • Bad
  • Excellent